Tool Store
Welcome to the Missing Link School Tool Store
Planning on stopping by our shop soon?
If you would prefer to pickup your tools in person,
just put a check in the box to the right.
See you soon!
park RT-2 Head Cup Remover
+ Click to enlarge
Designed for the 1-1/4 inch and 1-1/2 inch headest standards, the RT-2 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Strong, heat treated alloy steel with a nickel finish. Available to rent in our Victoria classroom.
Price: $48.99
Park RT-1 Head Cup Remover
+ Click to enlarge
The Park Tool Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Fits 1”, 1-1/8” and 1-1/4” headsets. Strong, heat treated alloy steel with nickel finish. This tool can be rented in our bike repair school. Our School is available to rent by the hour.
Price: $48.99
Park HHP-2 Headset Cup Press
+ Click to enlarge
The HHP-2 accurately aligns and presses 1", 1-1/8", 1-1/4", and 1.5" headset cups. In addition, it presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed cup wrenches firmly in place when removing or installing adjustable-type bottom brackets. Features a quick-release design for fast tool installation and removal, extra long (30cm) handles for superior leverage, and stepped bushings for precise cup alignment. Everyone enjoys using this tool in our bike tech workshops. Bike shop space rental is available in Victoria for this tool.
Price: $224.99
Park Tool HCW-7 Head Wrench
+ Click to enlarge
30mm and 32mm head wrench. Parks popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled lazer technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but it’s worth the extra effort. Check it out at our School.
Price: $21.99
Park Tool HCW-15 Head Wrench
+ Click to enlarge
32mm and 36mm head wrench. Parks popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled lazer technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but it’s worth the extra effort.
Price: $21.99
Park Tool HCW-6
+ Click to enlarge
32mm head wrench and 15mm pedal wrench. Parks popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled lazer technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but it’s worth the extra effort.
Price: $21.99
Park Tool HW-2 Headset Wrench
+ Click to enlarge
Most bike headset wrenches are too thin to use on the top locknut of headsets, particularly aluminum locknuts which can be marred and rounded off very easily. The HW-2 Professional Headset Locknut Wrench is the answer. It has a thick, semi-box opening and a substantial, extra long handle for a firm and precise grip on most 8 point 32mm and 36mm locknuts. Made of investment cast steel.
Price: $59.99
Park Tool HHP-3 Bearing Cup Press
+ Click to enlarge
Simple and economical, the HHP-3 is designed to install all sizes of head cups and one-piece bottom bracket cups.
Price: $99.99
Park Tool SG-7 Saw Guide
+ Click to enlarge
Accurately guides a hack saw to cut steerers, integrated seat posts and even airfoil shaped bike seat posts up to 3.5” (89mm) or round tubes from 1-1/4” (32mm) to 1-1/2” in diameter (45mm). The SG-7 features a hardened steel body and molded contact pads to protect tubes and frames.
Price: $44.99
Park Tool CRS-1 Crown Race Setter
+ Click to enlarge
Park has taken a fresh new approach to bike crown race installation. Traditionally, a mechanic would slam a tube down onto the bearing surface to “set” the race in place. The CRS-1 offers a different approach that offers faster, safer, and more precise installation. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-1 set includes one universal setting tube, three 1" inserts, and three 1-1/8" inserts. The CRS-1 is available for rent in Victoria.
Price: $99.99
Park Tool TNS-1 Nut Setter
+ Click to enlarge
The Threadless Nut Setter is used to install the star-fangled nut found on 1” and 1-1/8” threadless headset systems. Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers. The TNS-1 can be purchased or rented from our bike repair School in Victoria. (Star nuts not included.)
Price: $34.99
Park Tool TNS-4 Threadless Nut Setter
+ Click to enlarge
The park Tool TNS-4 makes it quick and easy to install star-fangled nuts used with 1” and 1-1/8” threadless headset systems. Park Tool uses a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. The unique design virtually eliminates pinched fingers. Replaceable set screw (#822).
Price: $43.99
Park Tool TNS-15 Threadless Nut Setter
+ Click to enlarge
The Park Tool Threadless Nut Setter TNS-15 is used for the 1¼" and 1.5” threadless headset systems. Thread the nut onto the TNS-15, insert into the fork stack, and tap it in with a hammer. Sets the starfangled nut to 15mm and keeps it straight. Long handle helps prevent pinched fingers.
Price: $39.99
Park Tool Crown Race Puller
+ Click to enlarge
The Park Tool CRP-1 is a precision tool for quickly and easily removing the headset crown race from the crown race seat of the bike fork. Universal design works with 1", 1-1/8", 1-1/4" and 1.5 crown race/fork (suspension or rigid) combinations Accepts steering columns up to 380mm All-steel construction for long life To use, simply turn the two small T-handles to press the thin-edged wedges under the crown race. Then turn the large T-handle to completely pull the crown race from the fork. No more hammer and punch! All steel construction for long life. NOTE: Blades pulling on crown race will wear with time and use. Crown races that are pressed very tight may also wear on blades. Blades are part number 1170-2 and are available as a replacement part.