Tool Store
Welcome to the Missing Link School Tool Store
Planning on stopping by our shop soon?
If you would prefer to pickup your tools in person,
just put a check in the box to the right.
See you soon!
Park CCP-22 Crank Puller
+ Click to enlarge
The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest bicycle cranks. Park's unique “floating tip” ensures smooth operation and long life. Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles. Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt. All bike cranks require a tool for removal. Reserve some bike shop space in our Victoria location. All bike repair courses provide at least one of these tools for you to use.
Price: $19.49
Park CCP-44 Bike Crank Puller
+ Click to enlarge
The CCP-44 Crank Puller is specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a “self extracting” system. It uses a long, comfortable handle. The 22 x 1 mm fine thread provides leverage needed to remove tight crank arms. Now with a stronger rotating tip system to ensure smooth operation and long life. NOTE: The CCP-44 is used on cranks using crank bolts larger then 8mm threading. ISIS Drive and Shimano Octalink may use either 12mm or 15mm bolt thread. "Power Spline" cranks use an 8mm bolt (not wrench size, bolt thread size) and use the CCP-22 for removal. For cranks using either a square spindle or an 8mm threaded bolt use the CCP-22 or the CWP-7.
Price: $19.99
Park CWP-7 Bike Crank Puller
+ Click to enlarge
The universal design of the CWP-7 has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms. The CWP-7 is made for the 22 x 1mm threading in the common cranks.
Price: $19.99
Park CCW-5 Bike Crank Bolt Tool
+ Click to enlarge
The CCW-5 features both a 14mm socket and 8mm hex wrench on a long, comfortable handle. Give this tool a try in our bicycle repair school.
Price: $14.99
Park SPA-2 Red
+ Click to enlarge
The SPA-2, with red handle, will fit one-key release retaining rings on Shimano® and Campagnolo® cranksets and the adjusting cone on most freewheel clusters (not freehubs). Park Tool Pin Spanners have been designed to give maximum usefulness and versatility at the lowest possible cost. Adjusts to a wide range of pin hole widths. Pin diameter is nominally 0.090" (2.3mm). Tough, high carbon tool steel is used on each tool to ensure long life. Handle is vinyl coated to give a good grip. Each Pin Spanner is color coated for easy recognition.
Price: $11.99
Park CNW-2 Chainring Nut Wrench
+ Click to enlarge
The CNW-2 makes bicycle chain ring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts, including the Campagnolo® chainring nuts. Most bicycle mechanics will have a CNW-2 in their tool kit.
Price: $4.99
Shimano TL-FC16 Crank Install Tool
+ Click to enlarge
Shimano TL-FC16 Crank Installation Tool. This tool is required to install Hollowtech II external bottom bracket cups. This is the bottom bracket bearing pre load tool.